|
|
|
PAINT
SHOP CHEMICALS
Peel Off
Stripable solvent based
coating
It
forms a tough, hard coating, which resists paint overspray, paint
splashes, greases and general factory dirt. Used for the coating
of any non-porous surface metals, glass, rubber, painted surfaces
and will peel readily once removed.
Peel Off was
designed for the protection of spray booth walls to allow
collection of paint overspray and give an easy clean method of
removal of the overspray.
P3 Tacky Oven
Coating 2247
Dust trapper
P3 Tacky Oven Coating 2247 is a
polymeric based coating formulated for use in high temperature
paint ovens. This product is applied to aluminium foil or
aluminium trays on oven floors to trap air borne particles that
may otherwise be deposited on freshly painted surfaces. P3
Tacky Oven Coating 2247 remains tacky for extended periods of time
at temperatures up to 165°C. The material is easy to use
and contains no HAP or SARA reportables.
Metafloc P
Paint spray booth denaturant
Metafloc P is formulated to denature paint
overspray in spray booths. It is particularly effective in
denaturing automotive polyester and epoxy primers and finishing
coats. It will also inhibit corrosion of the spray booth walls,
tanks and pipework. It contains a biocide to control bacterial
growth.
P3 Cold Stripper
100
Acid activated paint stripper
P3 Cold Stripper 100 contains a
chlorinated solvent and is phenolic free with low toxicity. It is
designed for stripping paint from all alloys except magnesium and
its alloys.
P3 Hot Stripper 50
Hot alkaline paint stripper
P3 Hot Stripper 50 is formulated
for immersion or spray application on painted steel surfaces. The
process will remove uncured and some cured paints.
P3 Hot Stripper
Additive 15
Additive for hot alkaline
paint stripping systems
P3 Hot Stripper Additive 15 is
formulated to assist in the removal of tough paint coatings or to
increase the rate of removal.
P3 Alustrip 60
Hot Tank Paint Remover
P3
Alustrip 60 is a hot tank paint remover that does not contain any
chlorinated solvents, phenol, chromates or free caustic. It can
safely be used on Aluminium, Titanium, Magnesium, Stainless Steel,
Ferrous Alloys and Copper. This product is suitable for removing
difficult materials such as phenolic resins, polyester resins,
silicon resins, polyamides, nylon, Teflon and polyurethane.
Loctite
7855 Hand Cleaner
Waterless Hand
Cleaner
This product is a better choice
than thinners and other harsh cleaning solvents normally used in
paintshops and workshops. The superior cleaning ability makes it
best for removing polyurethane, paint, resins, primers,
adhesives, silicones, varnish, enamel, etc. The skin
conditioning components in the product allow for the most
frequent use without affecting the skin.
Request
more Information
Send mail to hanney@mweb.co.za
with questions or comments about this web site.
|
| |
